This is a general hardware wallet question that ties into the btc blockhchain.
This is probably a dumb question but: If cold wallets are advertised to always be offline then how do they create a private key and how is it if I put that private key into another app based wallet or another hardware wallet this private key brings me to my funds. The only way is that they are connected to the internet for at least a short while.
01 June 2023
How to reproducibly build COLDCARD
❄️ Firmware and simulator for Coldcard Hardware Wallet - firmware/notes-on-repro.md at master · Coldcard/firmware
01 June 2023
Nobody should suggest using a Raspberry Pi for running a Bitcoin node in 2023!!! \ stacker news ~bitcoin
rPi 4 are Weak, NOT cheap, Old (2019), and NOT power efficient (compared to a modern low voltage CPU) I've been testing almost every Node in a box on rPi, and all the bad experiences below did happen to me at least once. rPi were designed in and sold as cheap toys to learn and experiment on DIY project using GPIO pins. They need assembly, heatsinks, screwing fans, plugging cables to the right PIN, ect ect. Come with cheap unpredictable fans that often don't last. The 5v3A power supply that comes with it most of the time is cheap and breaks. rPi only takes in 5 volts over that USB-C, some high quality power supply delivers ~4.9v and will trigger under voltage instability and throttling. Most newer, high quality power supply WILL NOT WORK, as they will try to jump up the voltage to 9, 12 or 20v instead of staying on 5v 5 volts mean that a high quality USB cable of relatively short length is required to make sure there are no voltage drop on that low voltage line. It's near impossible to find a charger that is above 2 AMP while the rPi needs 3A depending on the attached storage. Installing the OS on an SD card will lead to more corruption if the power is lost to the rPI The SD card has low and unpredictable write count. The SD card will become read only after a while. There is no way to attach HDD storage without a extra active USB to SATA adapter. This USB adapter is unpredictable and unreliable, might break on you, Might only work at USB 2.0 Speed No way to install the hard drive in a clean way, Most of the time the drive is left dangling on it's cable or is being taped to the bottom of the the rPi casing. The USB to SATA interface is slower than direct NVME or SATA connection. Being digitally sovereign is not ONLY about running a Bitcoin node to verify your transactions. Doing ANYTHING more than running a Bitcoin Core and a light electrum server (electrs) to verify only a small personal wallet will tax your rPi beyond it's limit. For about 100$ There are used, field test, computers that are about the same size, made of metal, 10 times more powerful, 2+ times the ram, Have ports for direct attachment of SATA and NVME drive. Wifi, Bluetooth, Have a very reliable power supply. All you might want to do it swap the HDD for a bigger 1 or 2tb one and boot from a USB stick to install a new Linux OS. The Electricity savings are ridiculously not worth it give the hassle. Each savings of 5 watts is equal to (0.005kwh) * 0.07 * 24 * 365 = $3.00 Link to Optiplex Micro search : https://www.amazon.com/s?k=optiplex+micro&s=price-asc-rank&crid=7OE2N02FZZIG&qid=1685628318&sprefix=optiplex+micro%2Caps%2C131&ref=srstprice-asc-rank [25 comments]
01 June 2023
Satoshi Nak-AI-moto: Bitcoin's creator has become an AI chatbot
A ChatGPT AI model that has been trained on material about Bitcoin (BTC) and public statements from its creator, Satoshi Nakamoto, has been birthed.
01 June 2023
Glassnode: BTC’s long-term holders’ spending continues to increase
According to recent data from Glassnode, an on-chain analytics firm, the Bitcoin market for the long term holders has experienced a transition phase. Notably, the transition marks an uptick in long-term holder spending this week. Data suggests a sharp increase in transaction volumes sent by profitable long-term Bitcoin holders this year. As of data from